Fusion T-Series Power Ball Valves

Severe Service Ball Valves for Power

Fusion T-Series Ball Valve

The Fusion Power Ball Valve is engineered with a single controllable leak path of the integral seat while providing thermal match of the ball and seat to achieve reliable and long-lasting shut off. Other standard options include:

Oven-Fused Carbide Coatings for many times the bond strength of more traditional HVOF-type coatings while eliminating the porosity that can allow leakage.
Precision grinding followed by 3600 Lapping to prevent “ridges” in the coating and improve sealing reliability.
Captured Flange / Repairable Design – Tight Shutoff (TA Series)
TA Series (Split-Body) Design for SW, BW & HUB-End Preparation available without welding or modification
TZ Series (Uni-Body) Design for SW Preparation
Low emission design
Integral stem stabilization

SPLIT-BODY

CAPTURED FLANGE DESIGN

A FUSION OF THE BEST OF COMPETING DESIGNS

Oven-Fused Carbide Coatings for many times the bond strength of more traditional HVOF-type coatings while eliminating the porosity that can allow leakage.
Precision grinding followed by 3600 Lapping to prevent “ridges” in the coating and improve sealing reliability.
Captured Flange / Repairable Design – Tight Shutoff (TA Series)
TA Series (Split-Body) Design for SW, BW & HUB-End Preparation available without welding or modification
TZ Series (Uni-Body) Design for SW Preparation
Low emission design
Integral stem stabilization