Lift Check Valves

lift check

The lift check valve, in common with all check valves, are used to prevent back flow in the line, and operate automatically, according to increases or decreases in line pressures.  Flow through a lift check is the same as a globe valve.  The disc raises up off of the seat as pressure below the disc increases, while a drop in pressure on the inlet side and a build up of pressure on the outlet side causes the valve to close.  Back pressure in the line holds the disc in the closed position.

 

Lift check valves are generally installed in a horizontal flow, but may be installed in vertical lines with the assistance of a spring behind the disc.  The lift check valve in its closed position offers a more effective shutoff and tighter seal than the Swing Check.


Ladish Valves lift check product line are manufactured as full port, threaded, socket-weld, flanged or weld end body types. Pressure classes include 150 through 600.  From our Houston manufacturing facility we offer valves in the following materials: CF8M, CF3M, CF8, CF3, CK20, CG8M, CF8C, CN7M, CW12MW, CY40, CW6MC, N12MV, N7M, M35-1, CZ100, CD3MN and many others.  

 

DESIGN HIGHLIGHTS

•  Full Port

•  Spring Loaded Available

  Available in Class 150, 300, 600

•  Special Trims Available

 

All valves are manufactured in accordance with the latest industry standards listed below as applicable:

 

ASME B16.34 - Valves, Flanged, Threaded and Welding Ends
ASME B16.10 - 
Face‐to‐Face and End‐to‐End Dimensions of Valves
ASME B16.11
 - Forged Fittings, Socket Welding and Threaded
ASME B16.25
 - Butt Welding Ends
ASME B16.5
 - Pipe Flanges and Flanged Fittings
API 594 - 
Check Valves:  Wafer, Wafer-Lug, and Double Flanged Type
API 598
 - Valve Inspection and Testing
MSS SP‐25
 - Standard Marking System for Valves, Fittings, Flanges
MSS SP‐42
 - Corrosion Resistant Gate, Globe, Angle and Check Valves
MSS SP‐61
 - Pressure Testing of Valves